https://safinatlulua.com/blogUAE-based supplier of oil and gas equipment: API 6A wellhead and pressure control, API 6D valves, OCTG, drilling and completion tools, line pipe, flanges, instrumentation and hazardous-area safety equipment for upstream, midstream and downstream operators.enhttps://safinatlulua.com/blog/cathodic-protection-desert-pipelineshttps://safinatlulua.com/blog/cathodic-protection-desert-pipelinesSun, 01 Nov 2026 00:00:00 GMTCathodic protection for pipelines in desert sand and sabkha: coatings, galvanic vs ICCP, groundbeds, ISO 15589-1 criteria, interference and monitoring.https://safinatlulua.com/blog/duplex-vs-super-duplex-vs-316l-offshorehttps://safinatlulua.com/blog/duplex-vs-super-duplex-vs-316l-offshoreSun, 01 Nov 2026 00:00:00 GMTDuplex vs super duplex vs 316L for seawater and produced water: PREN, chloride limits, ISO 15156-3 sour limits, HISC, welding and cost.https://safinatlulua.com/blog/esp-failures-hot-wells-spares-strategyhttps://safinatlulua.com/blog/esp-failures-hot-wells-spares-strategySun, 01 Nov 2026 00:00:00 GMTWhy ESPs fail in hot, gassy and sandy wells: overheating, gas lock, abrasion, cable and VSD issues, teardown analysis and a critical spares checklist.https://safinatlulua.com/blog/hazardous-area-equipment-iecex-atex-gcchttps://safinatlulua.com/blog/hazardous-area-equipment-iecex-atex-gccSun, 01 Nov 2026 00:00:00 GMTHow to select hazardous area equipment in the UAE and GCC: zones, gas groups, T-classes, EPL, Ex d/e/i, high-ambient ratings and IECEx vs ATEX.https://safinatlulua.com/blog/hic-ssc-testing-line-pipe-sour-servicehttps://safinatlulua.com/blog/hic-ssc-testing-line-pipe-sour-serviceSun, 01 Nov 2026 00:00:00 GMTHIC test for sour line pipe: NACE TM0284 CLR/CTR/CSR limits in API 5L Annex H, TM0177 SSC four-point bend, solutions A/B and PO requirements.https://safinatlulua.com/blog/fugitive-emissions-valve-standards-iso-15848-api-624https://safinatlulua.com/blog/fugitive-emissions-valve-standards-iso-15848-api-624Sun, 01 Nov 2026 00:00:00 GMTLow emission valves explained: ISO 15848-1/-2 tightness, endurance and temperature classes, API 622 packing, API 624 and API 641, and how to specify them.https://safinatlulua.com/blog/reducing-lead-times-oil-gas-equipmenthttps://safinatlulua.com/blog/reducing-lead-times-oil-gas-equipmentSun, 01 Nov 2026 00:00:00 GMTWhy oil and gas equipment lead times run long, from forgings and mill rolling to approvals, and practical ways UAE and GCC buyers can shorten them.https://safinatlulua.com/blog/valve-selection-sour-gas-servicehttps://safinatlulua.com/blog/valve-selection-sour-gas-serviceSun, 01 Nov 2026 00:00:00 GMTHow to specify sour service valves for H2S gas: NACE MR0175/ISO 15156 materials, hardness limits, valve type, RGD-rated seals, testing and documents.https://safinatlulua.com/blog/third-party-inspection-oil-gas-equipmenthttps://safinatlulua.com/blog/third-party-inspection-oil-gas-equipmentSun, 01 Nov 2026 00:00:00 GMTHow to specify third party inspection for oil and gas valves, wellheads and line pipe: ITPs, hold points, NDE, hydrotest and EN 10204 3.2.https://safinatlulua.com/blog/wellhead-maintenance-spares-planninghttps://safinatlulua.com/blog/wellhead-maintenance-spares-planningSun, 01 Nov 2026 00:00:00 GMTPlan wellhead spare parts for mature fields: gate valve servicing, seat and packing wear, ring gaskets, legacy equipment ID, spares matrix and API 6AR.